Toyota Highlander Check Engine Light

Toyota Highlander Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are different common causes including something as simple as a loose gas cap. Other generally common reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, broken oxygen sensor, faulty head gasket, dirty mass airflow sensor, or damaged spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and utterly repair it as necessary to restore factory specifications. When this occurs, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was totally fixed.

Every Toyota Highlander was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The speedy sensors are continually detecting conditions while sending important data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Nonetheless, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what absolutely is wrong nor what to do about it. That’s where we come in; Larry H. Miller Toyota Murray provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Certified Service professional.

What could cause the check engine light to come on in a Toyota Highlander?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Again, the check engine light could also be a warning of an essential problem that could cause serious damage to your engine and come with a hefty and pricey repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow usually means something less serious but a flashing check engine light reveals that your vehicle’s engine is in meaningful trouble and useful service is needed quickly. If your check engine light is flashing in your Toyota Highlander, we very endorse not to drive the car and schedule Toyota service today. Below is a list of the most common reasons your check engine light can come on:

• The battery is low or dead. The battery in your Toyota Highlander is every important. Without a vehicle battery, your vehicle won’t start, light up the road in front, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
• One of the most regular and frequent cause is that your Toyota Highlander gas cap is loose, damaged or missing. The gas cap for your Toyota Highlander serves numerous purposes. It prevents unpredictable gas fumes from being released when you aren't driving, it seals the fuel system and helps manage pressure within the fuel tank. What results if you have a broken fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more costly. Luckily, to replace a gas cap isn't costly. If your check engine light turns on expeditiously after you put gas in your Toyota Highlander, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Highlander is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota Highlander is having trouble starting, idling rough or has a sudden quick change in the position of the throttle pedal, this could be a critical sign of a broken mass airflow sensor.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your Toyota Highlander’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by regularly neglected maintenance, which is why Larry H. Miller Toyota Murray offers a complimentary multi-point examination with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your Toyota Highlander will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other perilous problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your Toyota Highlander if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even limit the car from starting. If these issues sound familiar, bring your Highlander to Toyota and have our team of talented certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could help you save substantially from having to get poor work and damage caused by poor installation work corrected.
• Your Toyota Highlander has a vacuum leak. Every Toyota Highlander has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they’re exposed to intense heat or extreme cold.
• New Spark Plugs or Plug Wires are needed for your Toyota Highlander. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will endure a evident poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause blocked catalytic converter or damage to ignition coils and O2 sensors, leading to more costly repairs.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more instantly and your car will be less efficient when it comes to fuel economy. So what results if I don’t replace your O2 sensor? A broken sensor can not only affect your miles per gallon, but it can cause significant damage to your catalytic converter and your Toyota Highlander's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the precisely correct mixture of air and fuel that enters the cylinders in your engine. A broken O2 sensor can also cause a vehicle to fail an emissions test.

What Does the Check Engine Light Mean?

One of the most ordinarily misunderstood lights or indicators in your Toyota Highlander is the check engine light. The check engine light is part of the essential onboard diagnostics system, and displays in an assortment of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do an assortment of things for your Toyota Highlander. Some of these essential duties include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean an assortment of different things. It can be as simple as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your Toyota Highlander, contact Larry H. Miller Toyota Murray. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Larry H. Miller Toyota Murray today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis. The average cost for a check engine light diagnosis & testing is usually between $88 and $111. The good news, Larry H. Miller Toyota Murray offers entirely free multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

Will the check engine light reset itself?

The check engine light on your Toyota Highlander will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will promptly turn itself off. Still, if your catalytic converter is working correctly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Toyota Highlander light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Larry H. Miller Toyota Murray so the light and code can be double-checked and reset.

Toyota Highlander Check Engine Light

If the check engine light in your Toyota Highlander starts flashing, that means that the problem needs attention instantly and your Toyota should be brought in instantly. A flashing light reveals that the problem is very serious and if not taken care of instantly may result in extensive and serious damage to the vehicle. This blinking light ordinarily signifies a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is likely, requiring an costly and considerable repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A defective, old or dirty spark plug can cause the engine to misfire. If your check engine light is constantly flashing, please contact our team of automotive experts at Larry H. Miller Toyota Murray expeditiously by calling 3854250839. If the problem is entirely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Toyota Highlander Check Engine Light Codes

The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, likewise known as the OBD (on-board computer diagnostic system) in your Highlander. There are hundreds of different codes that your check engine light can accurately represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your vehicle and will likewise allow that vital Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, obvious and helpful vehicle symptoms do not invariably accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are likewise hundreds of potential reasons for the light, including:

• Ignition system faults
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Fuel and air metering systems problems
• Bad Spark Plugs
• Old Battery
• Transmission issues
• Emissions controls issues
• Computer output circuit issues

This is why it is important for someone who does not have a lot of predominant automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a adept certified Toyota mechanic. Call Larry H. Miller Toyota Murray at 3854250839 today or schedule your check engine light service online today! If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away.

Is it safe to drive your Toyota Highlander with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. If the check engine light is flashing, this means that there is a serious issue and it is advised to service your Toyota Highlander promptly. Call the experts at Larry H. Miller Toyota Murray by dialing 3854250839 so you can describe the issues. Or lessen your speed and bring your Toyota to our certified mechanics as soon as likely.

How many miles can you drive with the check engine light?

Since any check engine code has its own level of severity, it is typically difficult to predict how numerous miles you can be safe in driving with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Larry H. Miller Toyota Murray to support determine if your car is safe to drive in or if we advocate a tow truck.

Check Engine Light Service Toyota Highlander

What do you do when you’re driving along in your Toyota Highlander and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks drastically because you may have precisely idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, calm breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is advised that you get your Toyota Highlander checked immediately. Ignoring that warning could end up causing major, extensive damage to costly engine parts.

When your Toyota Highlander's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t right, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can promptly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Larry H. Miller Toyota Murray. There are again a number of essentially inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the exactly correct issue and repair it.