2024 Toyota Land Cruiser Oil Filter: Specs & Service

The 2024 Toyota Land Cruiser is a four-wheel-drive SUV using regular unleaded fuel, and it comes in one trim. At Larry H. Miller Toyota Murray in Murray, UT, an oil filter service helps keep the engine’s circulating oil cleaner as it carries away normal operating debris. The service includes a filter matched to the engine actually fitted, a new drain plug gasket or washer where the engine uses one, and a leak check after the engine has been run. Replacing the filter alongside the oil helps prevent a loaded filter from opening its bypass valve and allowing unfiltered oil to circulate. Drivers can schedule service with the Larry H. Miller Toyota Murray service department.

What an oil filter replacement on a 2024 Toyota Land Cruiser involves

An oil filter replacement for the 2024 Toyota Land Cruiser begins with fitting a filter matched to this engine’s specification. The correct filter is selected for the engine actually installed in the vehicle, helping it capture the debris the oil collects during operation. During the service, the sealing connection is renewed with a new drain plug gasket or washer where this engine uses one. Renewing that sealing item supports a proper connection when the oil is drained and replaced.

After the new filter and oil are installed, the engine is run so the service team can check the filter seal for leaks. This final check helps confirm that the filter area is properly sealed before the vehicle leaves. The filter is replaced alongside the oil because a loaded filter can cause the bypass valve to open, allowing oil to circulate without filtration. To have the filter matched to your engine and replaced with the oil, schedule service at Larry H. Miller Toyota Murray.

Why the filter matters on a 2024 Toyota Land Cruiser

The oil filter holds the debris that engine oil picks up as it circulates through the 2024 Toyota Land Cruiser’s 2.4-liter, four-cylinder engine. Oil carries away particles and other contaminants, while the filter retains that material instead of allowing it to continue moving through the engine. That filtering role matters because the oil is expected to lubricate moving components while also transporting unwanted material toward the filter.

As the filter loads, its bypass valve opens. A loaded filter does not stop the engine from getting oil; it stops the engine from getting filtered oil, which is a quieter but important problem. Replacing the filter with the oil keeps a used filter from being stretched across two changes. The manufacturer’s maintenance schedule does not establish an interval for this page, so service timing should be guided by the manufacturer’s schedule, the vehicle’s service history, and inspection findings.

Oil and filter service at Larry H. Miller Toyota Murray

Larry H. Miller Toyota Murray provides oil and filter service for the 2024 Toyota Land Cruiser at 5650 S. State Street in Murray, UT 84107. Booking the service gets the filter matched to the engine actually fitted and replaced alongside the oil. The visit also includes the sealing item used by the engine and a check for leaks at the filter seal after the engine has run. These steps address the filter’s job directly rather than treating the oil change as a fluid-only service.

Drivers can review service specials before booking or use the online schedule appointment form. For assistance from the service department, call 385-425-0839. Larry H. Miller Toyota Murray is located at 5650 S. State Street, Murray, UT 84107.