2020 Toyota Tundra Air Filter in Murray, UT

The 2020 Toyota Tundra engine air filter sits in a rectangular air box inside the engine bay on the intake side.

You’ll find the air box under the hood, typically toward the passenger-side fender on the 5.7L V8. It opens by releasing metal clips or fasteners so the filter can be lifted out and replaced. For accuracy, our technicians verify the housing seal and snorkel fit to prevent unmetered air.

• Engine bay location: intake-side air box
• Access: release clips/fasteners; lift lid and filter
• We inspect the housing seal and intake snorkel during service

The engine air filter cleans air for combustion, while the cabin air filter cleans air for the HVAC system and passengers.

On the 2020 Toyota Tundra 5.7L V8, the engine filter protects the throttle body, mass airflow sensor, and cylinders from dust and debris. The cabin air filter (typically behind the glove box) captures pollen and particulates that enter the cabin through the HVAC intake, supporting clear airflow and comfort in Utahs four-season climate.

• Engine filter: protects intake, MAF, and engine internals
• Cabin filter: improves in-cabin air and HVAC performance
• Locations: engine bay air box; cabin area (behind glove box)

Engine: reduced power, worse fuel economy, rough idle; Cabin: weak airflow and musty odors.

On a 2020 Toyota Tundra, Utah dust, winter road sand, and spring pollen can load filters quickly. If your 5.7L V8 feels sluggish or you notice more frequent downshifts, inspect the engine filter. Inside, diminished HVAC flow or odors point to a saturated cabin filter, especially after peak pollen or wildfire-smoke periods in the Salt Lake Valley.

• Engine symptoms: power loss, lower MPG, uneven idle
• Cabin symptoms: reduced fan output, odors, haze on glass
• Local factors: dust, pollen, smoke elevate filter loading

The engine air filter is typically DIY-friendly; dealer service adds OEM-spec parts plus intake and MAF checks.

Most Tundra owners can open the air box and swap the engine filter with basic tools. The cabin filter often requires glove box access and careful trim handling. At Larry H. Miller Toyota Murray, we install Toyota-spec filters and include a housing seal check, intake/MAF visual inspection, and proper disposal—important for reliable performance along I-15 and mountain routes.

• DIY possible for engine filter; cabin needs trim access
• Dealer adds OEM-spec filter and intake/MAF inspection
• Includes proper seating/seal to prevent unmetered air

The 2020 Toyota Tundra cabin air filter is typically located behind the glove box inside the passenger compartment.

Access usually involves lowering or removing the glove box to reach the HVAC filter door. Our Murray, UT service team can confirm fitment and ensure the filter door and seals are properly reinstalled—key for strong airflow during Utahs hot summers and snowy winters.

• Access: glove box lowered/removed to reach HVAC door
• Seal and door seating verified for airflow integrity
• Quick service available at our Murray facility

Yeswe install Toyota Genuine Parts or OEM-spec filters matched to the 2020 Toyota Tundra.

OEM-spec filtration ensures correct media, fit, and airflow for the 5.7L V8 and the Tundras HVAC system. Proper fit protects the mass airflow sensor and maintains designed fan performance. If you prefer a Toyota Genuine Part, request it when you schedule service; well confirm part numbers upon VIN verification.

• OEM-spec media and frame ensure proper sealing
• Protects MAF and throttle body from contaminants
• VIN-based fitment confirmation for accuracy

Air filter service is completed within a single scheduled appointment slot at our Murray, UT service center.

Because access on the 2020 Toyota Tundra is straightforward, engine and cabin filter checks are typically performed during routine visits. Actual time varies with inspection findings (housing condition, debris removal, MAF visual checks). To plan your visit, use our online tool to schedule service and review current service specials.

• Performed during a standard booked appointment
• Includes housing, seal, and MAF visual inspections
• Same-stop convenience with other routine services

Choose Toyota Genuine or OEM-spec engine and cabin filters sized for the 2020 Toyota Tundra and your VIN.

Correct fitment ensures proper sealing and airflow for the 5.7L V8 intake and the HVAC system. Bring your VIN or plate number, and our parts advisors will match the correct Toyota-spec filters. For installation and inspection in one visit, schedule service and well confirm parts on arrival.

• Use Toyota Genuine or OEM-spec filtration
• VIN-based selection avoids fit issues
• Local parts support at our Murray location

Our 2020 Toyota Tundra air filter service covers both performance and comfort systems with methodical checks. We begin with an engine air filter inspection, verifying air box integrity, seal condition, and snorkel connections. If replacement is needed, we install an OEM-spec filter and ensure the housing is latched evenly. The cabin air filter is then inspected for debris, odor, and airflow restriction; if replacement is warranted, we access the HVAC door behind the glove box, seat the new filter correctly, and confirm door alignment. A visual inspection of the mass airflow (MAF) sensor and intake tract helps safeguard drivability and fuel economy. Parts are matched to your VIN for fit. If parts carry a manufacturer warranty, we process them in accordance with Toyota and our facilitys policies. Ready to book? Schedule service or call us at (801) 264-6300.

The 2020 Toyota Tundras 5.7L V8 (5663 cc) uses a panel-style engine air filter housed in a sealed air box to protect the mass airflow sensor and throttle body. The cabin air filter sits within the HVAC case, typically behind the glove box, and captures dust, pollen, and fine particulates common across the Salt Lake Valley. Toyota Genuine or OEM-spec filters are recommended to maintain correct airflow, filtration efficiency, and fitment tolerances designed for the Tundra platform. Replace filters according to your Toyota Owners Manual and adjust based on operating conditionsheavy dust, wildfire smoke, or high-pollen seasons may require more frequent inspections. Bring your 2020 Toyota Tundra to Larry H. Miller Toyota Murray in Murray for OEM-spec filter serviceschedule service.

We serve drivers throughout the Salt Lake Valley and Greater Salt Lake City metro area, including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditionsconstruction dust, winter de-icer residue, canyon drives, and spring pollencan load the engine and cabin filters on a 2020 Toyota Tundra faster than in milder regions. Our factory-authorized Toyota team inspects housing seals, verifies fit, and performs a visual MAF check to protect your 5.7L V8 and HVAC performance. Visit our modern service facility at 5650 South State Street, Murray, UT 84107, or use our online tool to schedule an appointment. Before you arrive, review current service specials to see available offers for your visit.