2020 Toyota Tacoma Air Filter

The 2020 Toyota Tacoma engine air filter sits inside a rectangular airbox in the engine bay along the fender, secured by clips or screws.

This airbox feeds the 2.7L inline-4 intake, protecting the engine from dust common along the Wasatch Front. Release the fasteners, lift the lid, and the filter lifts straight out. If you prefer professional help in Murray, we inspect the housing and sealing surfaces during replacement.

• Located in the engine bay airbox near the fender
• Access typically requires releasing a few clips or screws
• Seating the filter gasket correctly prevents unmetered air leaks

The 2020 Toyota Tacoma cabin air filter is behind the glove box, accessed by lowering the glove box to reach the HVAC filter door.

This filter traps pollen and road dust that are common in Murray and the Salt Lake Valley. Empty the glove box, release the side stops, and open the rectangular access panel to slide the filter out. Align the airflow arrow correctly when installing the new filter.

• Behind-glove-box access to the HVAC filter slot
• Airflow arrow must point in the direction marked on the housing
• Greatly improves HVAC airflow and cabin freshness

The engine air filter protects the Tacoma’s 2.7L inline-4 from dirt entering the intake, while the cabin air filter cleans air entering the HVAC for passengers.

Both filters improve quality—one for combustion, one for comfort. In Utah’s dusty, high-pollen seasons, both can load faster. Keeping them fresh supports performance and keeps your interior air clean during commutes between Murray and Salt Lake City.

• Engine filter = airbox in the engine bay (combustion protection)
• Cabin filter = behind glove box (HVAC and passenger air)
• Different media designs and locations serve different purposes

Common signs include reduced power, lower fuel economy, and a rougher idle for the engine filter, plus weak HVAC airflow or musty odors for the cabin filter.

In Murray’s variable climate—dusty construction zones, spring pollen, and winter road grit—filters can load up quickly. If your 2020 Toyota Tacoma feels sluggish or your vents blow weakly, an inspection may be due. We can assess both filters and the intake sealing surfaces during a quick visit.

• Engine: noticeable loss of throttle response, mpg drop
• Cabin: reduced fan output, persistent dust or odors
• Visual: dark, debris-laden filter media

Yes—both filters are DIY-friendly, but dealer service adds OEM-spec parts, intake/MAF checks, and proper housing sealing.

The engine filter swap is straightforward; the cabin filter requires glove box access. If you want added assurance for your 2020 Toyota Tacoma in Murray, our technicians also inspect the airbox, ducts, and MAF sensor area to prevent unmetered air leaks and noise.

• DIY feasible with basic tools and careful re-seating
• Dealer installs Toyota-spec filters matched to your Tacoma
• Includes inspection of airbox clips, seals, and ducts

Yes—Larry H. Miller Toyota Murray installs Toyota Genuine (OEM-spec) engine and cabin air filters on the 2020 Toyota Tacoma.

OEM-spec filtration helps maintain intended airflow and fit in the Tacoma’s airbox and HVAC housing. It also supports performance of the 2.7L inline-4 and preserves interior air quality in Utah’s dusty, high-altitude conditions.

• Toyota Genuine filter media and fitment
• Correct gasket sealing to prevent bypass
• Designed for the Tacoma’s intake and HVAC systems

Get 2020 Toyota Tacoma air filter service at Larry H. Miller Toyota Murray, 5650 South State Street, Murray, UT 84107.

We’re the flagship Toyota store serving the Salt Lake Valley, including Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Schedule online for your 2020 Toyota Tacoma and we’ll handle both filters in one visit.

• Convenient Murray location with factory-authorized service
• Online booking: schedule service
• OEM-spec parts and environmental disposal included

Yes—check our current offers on the service specials page for 2020 Toyota Tacoma air filter savings.

Promotions change with seasonality in the Salt Lake Valley, including pollen and winter-dust periods that impact filters. Review specials before your appointment, then book online to lock in available offers for your 2020 Toyota Tacoma.

• See offers: service specials
• Combine engine and cabin filter service for one visit
• Up-front pricing with OEM-spec parts

Our process focuses on accuracy, airflow, and seal integrity for your 2020 Toyota Tacoma. We begin with an engine air filter inspection, checking the media, frame, and gasket for debris loading or damage. If replacement is needed, we install an OEM-spec filter and verify the airbox lid, clips, and ducts are properly seated to prevent unmetered air. Next, we inspect and replace the cabin air filter behind the glove box, ensuring the airflow arrow is oriented correctly and the HVAC door seals fully. Finally, we perform a visual check of the intake tract and MAF sensor area for contamination or loose connections. Ready to proceed? View offers on our service specials page and schedule service online for your 2020 Toyota Tacoma.

Larry H. Miller Toyota Murray serves the entire Salt Lake Valley—Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville—with Toyota factory-authorized air filter care for the 2020 Toyota Tacoma. Utah’s climate and terrain can load filters faster: windborne dust, spring pollen, canyon drives, and winter road grit all impact airflow and cabin comfort. Our team inspects both the engine airbox and the cabin’s HVAC filter housing to ensure correct sealing and placement, restoring performance and interior air quality. As the original Larry H. Miller dealership opened in 1979, we’re easy to find at 5650 South State Street. Have questions or need directions? Check our service center page, review service specials, and schedule your appointment for your 2020 Toyota Tacoma.

The 2020 Toyota Tacoma uses two serviceable filters: an engine air filter in the under-hood airbox safeguarding the 2.7L inline-4, and a cabin air filter positioned behind the glove box that cleans HVAC intake air for passengers. We install Toyota Genuine (OEM-spec) filters or their exact equivalents to maintain proper fit, seal compression, and designed airflow. If you drive dusty job sites, unpaved roads, or experience heavy pollen along the Wasatch Front, you may need more frequent inspections. During service, we also check airbox clips, duct connections, and the MAF sensor area for debris or looseness that can affect drivability. Bring your 2020 Toyota Tacoma to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.