2020 Toyota Prius-Prime Air Filter in Murray, UT

The 2020 Toyota Prius Prime engine air filter sits inside the sealed airbox in the engine bay, while the cabin air filter is typically behind the glove box.

This layout makes visual checks straightforward in our Murray service drive and allows quick access for inspection. On the 2020 Toyota Prius Prime, the airbox opens with clips or screws; the cabin filter slides out from the HVAC housing once the glove box is lowered. Our team verifies sealing surfaces so unfiltered air can’t bypass the element.

• Engine filter: airbox in the front engine bay
• Cabin filter: behind glove box in HVAC housing
• We check airbox seals and clips for proper closure

The engine air filter cleans intake air for combustion, while the cabin air filter cleans the HVAC air you breathe inside the 2020 Toyota Prius Prime.

Both filters support performance and comfort, but they do different jobs in different locations. In Northern Utah, dust and road sand can load the engine filter faster, while spring pollen and smoke affect the cabin filter. We inspect both and replace only when needed.

• Engine filter protects engine and MAF sensor from debris
• Cabin filter reduces dust, pollen, and odors in the cabin
• Different housings, different service intervals

Common signs include reduced power, lower fuel economy, and a rough idle for the engine filter, plus weak airflow or musty odors for the cabin filter.

On the 2020 Toyota Prius Prime, a restricted engine filter can dull throttle response, especially on steep Wasatch Front climbs. A loaded cabin filter shows up as fan noise with little airflow or lingering smells. If you notice these symptoms in Murray traffic, book a quick inspection.

• Engine: hesitation, decreased MPG, uneven idle
• Cabin: weak vents, dusty interior, unpleasant odors
• Visual check often confirms dark, debris-filled media

Yes—engine filters are generally DIY-friendly; cabin filters can require trim removal, and the dealer adds OEM-spec parts plus intake/MAF checks.

If you’re comfortable with basic clips and screws, the 2020 Toyota Prius Prime engine filter is straightforward. The cabin filter is often easy too, but glove box stops and covers can be delicate. At Larry H. Miller Toyota Murray, we include housing inspection and a visual MAF sensor check to help maintain hybrid efficiency.

• DIY: follow owner’s manual and orientation arrows
• Dealer: OEM-spec filter, housing seal check, disposal
• Schedule service online to ensure proper fitment

Yes—our technicians install Toyota-approved, OEM-spec engine and cabin air filters on the 2020 Toyota Prius Prime.

OEM-spec filtration helps preserve airflow calibration and HVAC performance while fitting the housings correctly. In Murray and the wider Salt Lake Valley, using the correct media and gasket design prevents bypass during dusty, sandy, or high-pollen periods. Ask our team to show you the old and new filters at pickup.

• OEM-spec fit and filtration efficiency
• Designed for Toyota HVAC and intake systems
• Installed and verified by factory-trained technicians

You can replace both engine and cabin filters at Larry H. Miller Toyota Murray, 5650 South State Street, Murray, UT 84107.

We serve the Salt Lake Valley and Greater Salt Lake City metro, including Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Our team inspects both filters on your 2020 Toyota Prius Prime and installs OEM-spec parts. Use our online tool to book a time that fits your day.

• Convenient Murray location with easy access
• Hybrid-experienced, factory-authorized service
• Schedule service or check service specials

The 2020 Toyota Prius Prime cabin air filter is typically located behind the glove box in the HVAC intake housing.

Lowering the glove box reveals the rectangular access panel where the cabin filter slides in. This design makes seasonal changes quick—helpful for spring pollen in the Salt Lake Valley. Our Murray team confirms airflow direction and seals to prevent bypass.

• Access via glove box stops and side tabs
• Check arrow orientation for proper airflow
• Inspect for leaves, sand, and fine dust

We pair OEM-spec filters with an intake housing and MAF visual check to help maintain the 2020 Toyota Prius Prime’s efficiency and HVAC performance.

In Northern Utah, dust, winter road sand, and wildfire smoke can load filters faster. Our process is designed for local conditions and hybrid needs. You’ll leave with clean filtration and clear guidance on future checks.

• OEM-spec media sized for Toyota housings
• Visual MAF and seal inspection included
• Online schedule service and rotating service specials

The 2020 Toyota Prius Prime uses two filters: an engine air filter in the under-hood airbox to protect the intake system and a cabin air filter in the HVAC housing behind the glove box to clean interior air. Toyota recommends following the maintenance schedule in your owner’s manual for replacement timing based on driving conditions. In Utah’s Wasatch Front, dust, road sand, and seasonal pollen can load both filters more quickly. During each visit, our technicians confirm proper fit, sealing edges, and airflow arrows, and they perform a visual MAF sensor check to support hybrid drivability. Bring your 2020 Toyota Prius Prime to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Our air filter service for the 2020 Toyota Prius Prime is built around clarity and care. We begin with an engine air filter housing inspection, then remove and assess the filter’s condition against Toyota’s guidelines. If replacement is warranted, we install an OEM-spec element and verify the airbox seal and clips. Next, we access the cabin filter behind the glove box, inspect for dust, pollen, and debris, and replace it when needed, ensuring airflow arrows are correct. A visual MAF sensor and intake snorkel check is included, along with responsible disposal of old filters. See current service specials and schedule service online.

Larry H. Miller Toyota Murray serves the Salt Lake Valley and Greater Salt Lake City metro—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions like spring pollen, summer dust, and winter road sand can accelerate filter loading on the 2020 Toyota Prius Prime. Our factory-authorized team has been serving Northern Utah since 1979 at 5650 South State Street, Murray, UT 84107, with processes tailored to Toyota hybrids. We provide straightforward inspections, OEM-spec replacements, and clear guidance on future checks. For directions, questions, or to reserve a bay, use our online schedule service tool and review current service specials before you arrive.