2020 Toyota Land-Cruiser Air Filter in Murray, UT

The 2020 Toyota Land Cruiser engine air filter sits in a rectangular housing inside the engine bay, typically on the passenger side near the intake duct.

This location lets you access the filter by releasing housing clips or screws and lifting the cover straight up. In Murray’s dusty summer months and winter road sand, the intake path can collect debris, so technicians also inspect the air box seal and snorkel. Our team in the Salt Lake Valley checks fitment against Toyota Genuine Parts to maintain proper airflow and MAF readings.

• Under-hood air box adjacent to intake snorkel
• Cover retained by clips or screws for quick access
• Sealing gasket inspected to prevent unfiltered air bypass

The 2020 Toyota Land Cruiser cabin air filter is located behind the glove box inside the HVAC intake area.

Access usually involves lowering the glove box, releasing side stops, and sliding out a small filter tray. Because the Salt Lake City area sees spring pollen and winter particulates, this filter can clog sooner than expected. Our technicians in Murray replace the element and ensure the tray seals correctly to keep airflow strong and odors down.

• Behind-glove-box access with stop tabs released
• Tray-style holder slides out toward the passenger seat
• Orientation arrow must face the correct airflow direction

The engine air filter protects the 5.7L V8’s intake air for combustion, while the cabin air filter cleans the HVAC air you and your passengers breathe.

The engine filter lives under the hood and affects power, efficiency, and MAF sensor readings. The cabin filter sits behind the glove box and targets pollen, dust, and odors for interior comfort. Both are serviceable items and benefit from Toyota Genuine Parts for proper fit and filtration in Utah’s varied road and climate conditions.

• Engine: performance and fuel-quality protection
• Cabin: interior air quality and HVAC airflow
• Different locations, sizes, and media types

Common engine filter signs include reduced power and poorer fuel economy; cabin filter signs include weak airflow and musty odors.

On the 5.7L V8, a clogged engine filter restricts intake, which can dull throttle response, increase intake noise, and skew MAF readings. In the cabin, Utah dust and seasonal pollen can load the filter, causing fan strain and haze on interior glass. If you notice these symptoms around Murray or the Salt Lake Valley, a prompt inspection helps prevent secondary issues.

• Engine: sluggish acceleration, rough idle, higher fuel use
• Cabin: reduced vent flow, odor, increased window film
• Visible debris or darkened filter media on inspection

Yes—engine filters are often DIY-friendly, while cabin filters may require trim removal; dealer service adds OEM parts and intake/MAF checks.

Many owners can swap the under-hood engine filter with basic tools, but the glove-box cabin filter can be trickier to seat correctly. Our Murray team installs Toyota Genuine Parts, inspects the air box, checks sealing surfaces, and visually inspects the MAF. If you prefer professional help, you can schedule service online.

• DIY engine filter: simple clips/screws, minimal tools
• Cabin filter: glove box stops and tray orientation
• Dealer adds OEM fitment, intake seal, and MAF visuals

Yes—our service team installs Toyota Genuine engine and cabin air filters designed for the 2020 Toyota Land Cruiser.

OEM-spec filtration preserves the 5.7L V8’s airflow and ensures the HVAC system maintains proper resistance and fit. Genuine parts also match the air box and tray dimensions to prevent leaks. For consistent results across Murray, Salt Lake City, Sandy, and nearby communities, request Toyota Genuine Parts during your visit or when you schedule an appointment.

• Toyota Genuine Parts built to OEM specifications
• Fitment aligned to Land Cruiser air box and HVAC tray
• Backed by Toyota engineering and testing standards

Yes—most replacements need only basic hand tools, such as a screwdriver or socket to release the air box cover.

Once the cover is loosened, the filter lifts straight out for inspection or replacement. Ensure the new Toyota Genuine filter seats fully and the gasket aligns with the housing. In dusty Salt Lake Valley conditions, also check the snorkel and drain ports for debris before re-closing the air box.

• Commonly: Phillips screwdriver or small socket
• Inspect and clean air box sealing surfaces
• Confirm correct filter orientation and full seating

Use our online scheduler at the “schedule service” link to book your Land Cruiser air filter service in minutes.

Choose a time at Larry H. Miller Toyota Murray that fits your day, and we’ll prepare the correct Toyota Genuine filters for your visit. You can also check current service specials before confirming. For quick booking now, tap schedule service.

• Online booking: schedule service
• Review offers: service specials
• Location: 5650 South State Street, Murray, UT 84107

No—the engine and cabin filters are different parts with different sizes and media, and they are not interchangeable.

The engine filter is sized for the 5.7L V8 intake housing, while the cabin filter fits a tray behind the glove box. Using the wrong part can cause air leaks or restricted flow. Our Murray parts counter and technicians match Toyota Genuine part numbers to your 2020 Toyota Land Cruiser to ensure proper fit.

• Distinct dimensions and sealing surfaces
• Engine filter supports combustion airflow requirements
• Cabin filter targets HVAC airflow and interior air quality

The 2020 Toyota Land Cruiser uses two serviceable filters: an engine air filter in the under-hood air box and a cabin air filter behind the glove box. For best results, use Toyota Genuine engine and cabin filters designed for the 5.7L V8 and the Land Cruiser HVAC tray. This preserves airflow, sealing, and MAF sensor stability. Utah’s mix of dust, road sand, and seasonal pollen can accelerate loading, so periodic inspections are wise, especially after canyon drives or storm cleanups. If you notice reduced power, rough idle, weak vent airflow, or odors, both filters likely need attention.

Bring your 2020 Toyota Land Cruiser to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Our air filter service for the 2020 Toyota Land Cruiser focuses on accuracy, fit, and airflow. A technician verifies the engine air filter condition, removes debris from the air box, and installs a Toyota Genuine filter with correct gasket seating. Next, we lower the glove box, slide out the cabin filter tray, and replace the cabin element if loaded with dust or pollen. We also check the intake snorkel path and visually inspect the mass airflow (MAF) sensor and connectors for contamination or damage. Proper reassembly confirms there are no bypass leaks or rattles.

Parts installed meet Toyota OEM specifications for fit and filtration. If you’d like to plan your visit around current offers, review our service specials. Ready to book? Use our online schedule service tool any time.

We serve drivers across the Salt Lake Valley and Greater Salt Lake City area—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local driving conditions can load filters quickly: summer dust, fall debris, and winter traction materials all add particulates to the engine intake and HVAC system. Timely engine and cabin filter replacements help the 5.7L V8 breathe correctly and maintain steady HVAC airflow for your passengers. As the original Larry H. Miller dealership site, our team delivers model-specific Toyota care with efficient appointments and OEM parts on hand.

Find us at 5650 South State Street, Murray, UT 84107. Have questions or need directions? Use our online schedule service tool or check service specials before you arrive.