2019 Toyota Mirai Air Filter

The 2019 Toyota Mirai’s fuel‑cell intake air filter is housed in the engine bay within the air intake box.

This filter cleans outside air before it reaches the Mirai’s fuel‑cell system. You’ll access it by opening the hood and releasing the intake box clips to lift the cover. Keeping this filter clean helps maintain proper airflow and fuel‑cell performance on Murray’s city streets and I‑15 commutes.

• Location: engine bay intake box with removable cover
• Purpose: protects the fuel‑cell stack from dust and debris
• Schedule an appointment: schedule service

The 2019 Toyota Mirai’s cabin air filter sits behind the glove box in the HVAC intake.

Access usually involves lowering or removing the glove box to reach a rectangular access panel. In the Salt Lake Valley—where dust, pollen, and winter road debris fluctuate—this filter helps keep interior air clean and HVAC performance consistent.

• Location: behind glove box, in front HVAC intake
• Access: remove glove box stops to reach filter door
• Check local offers: service specials

The fuel‑cell intake air filter protects the Mirai’s power system, while the cabin air filter cleans the air you breathe inside the car.

The intake filter screens outside air before it reaches the fuel‑cell stack, supporting efficiency and longevity. The cabin filter traps dust, pollen, and particulates in the HVAC stream. Both are separate parts with different jobs, and each affects performance or comfort in different ways across Murray and Greater Salt Lake City driving.

• Fuel‑cell intake: engine bay, airflow to power system
• Cabin: behind glove box, HVAC/passenger comfort
• OEM parts available at LHM Toyota Murray

Common signs include weak HVAC airflow, a musty odor from the vents, and increased interior dust.

When the filter loads up with pollen or road dust, airflow drops and the blower works harder, especially noticeable during Wasatch Front pollen peaks and winter inversion seasons. If you see reduced defogging performance or smell stale air, inspect the cabin filter.

• Symptoms: weak airflow, odors, hazy windows
• Impact: reduced comfort and HVAC efficiency
• Book quickly online: schedule service

Watch for reduced responsiveness, louder intake noise, and possible warnings related to airflow or system performance.

Excess dust from construction zones or canyon driving can load the intake filter, limiting airflow to the Mirai’s fuel‑cell system. If the vehicle feels less responsive or the system sounds strained, an inspection is smart before longer drives around the Salt Lake Valley.

• Clues: sluggish response, unusual intake sound
• Cause: dust/pollen buildup in intake media
• Have it checked: schedule service

Yes, many owners can DIY, but dealer service adds model‑specific inspection of the intake housing and related components.

The fuel‑cell intake filter is typically straightforward under the hood; the cabin filter requires glove box removal and correct airflow orientation. Our Toyota-trained team in Murray verifies seals, checks the intake housing, and ensures proper fitment using Toyota Genuine parts.

• DIY: basic tools for intake; glove box access for cabin
• Dealer adds: housing/connector checks and fitment
• See local deals: service specials

Yes—Toyota Genuine air filters are available for the 2019 Toyota Mirai at Larry H. Miller Toyota Murray.

Using OEM-spec filtration helps maintain airflow and sealing tailored to the Mirai’s fuel‑cell and HVAC systems. Our parts counter and service bays in Murray stock Toyota Genuine components designed to fit and perform to manufacturer standards.

• Brand: Toyota Genuine Parts
• Fitment: exact sizing for Mirai intake and cabin
• Plan your visit: schedule service

Visit Larry H. Miller Toyota Murray at 5650 South State Street, Murray, UT 84107 for Mirai air filter service.

We serve the Greater Salt Lake City metro—Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Our Toyota-trained team can inspect and replace both the intake and cabin filters and review current offers online.

• Address: 5650 South State Street, Murray, UT 84107
• Online booking: schedule service
• View offers: service specials

No—the Mirai uses a fuel‑cell intake air filter that serves the hydrogen fuel‑cell system rather than an internal‑combustion engine.

While both filters clean incoming air, the Mirai’s unit supports the fuel‑cell stack’s airflow needs. The service process is similar—remove the intake box cover and swap the filter—but the part and performance requirements are specific to the Mirai.

• Function: cleans air for the fuel‑cell system
• Service: intake box access under the hood
• Right fit: Toyota Genuine Mirai‑specific filter

The 2019 Toyota Mirai uses two distinct filters: a fuel‑cell intake air filter located in the engine bay airbox and a cabin air filter positioned behind the glove box. Toyota Genuine filters are engineered to match Mirai‑specific airflow, sealing surfaces, and media density. For the intake filter, proper seating of the airbox cover and clips is essential to prevent unfiltered air bypass. The cabin filter should be installed with airflow arrows oriented correctly to maintain HVAC performance and reduce odors. If you drive in dusty corridors or during heavy pollen periods along the Wasatch Front, inspect more frequently. Bring your 2019 Toyota Mirai to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

LHM Toyota Murray serves the Salt Lake Valley and Greater Salt Lake City metro, including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions—dust from construction, canyon winds, winter road sand, and spring pollen—can load both the Mirai’s fuel‑cell intake filter and its cabin filter faster than in milder climates. Our certified Toyota technicians understand Mirai‑specific routing, seals, and sensor connectors and verify that the airbox and glove box assemblies are reinstalled correctly. If you notice reduced responsiveness or weaker HVAC airflow, book an inspection. For directions, current service offers, and to choose a time that fits your schedule, use our online tool or call us directly.

Our air filter service for the 2019 Toyota Mirai covers both comfort and performance needs. We begin with a visual inspection of the fuel‑cell intake airbox, seals, and ducts, then remove and replace the intake filter with a Toyota Genuine part as needed. Next, we access the cabin filter behind the glove box, check for debris and odor sources, and install a properly oriented Toyota cabin filter. Technicians also perform a basic visual of intake sensors and connectors and confirm secure reassembly. You’ll receive findings and recommendations, plus help reviewing any current service offers. Ready to book? Use our online portal to schedule service or call our team.