2017 Toyota 4runner Air Filter in Murray, UT

The 2017 Toyota 4Runner’s engine air filter sits inside a rectangular airbox in the engine bay, typically on the passenger side.

The airbox feeds the 4.0L V6 intake and opens with simple clips or screws for quick filter inspection. Keeping this filter clean helps the 270-hp engine breathe properly and supports smooth throttle response around Murray and the Greater Salt Lake City area. If you prefer a professional check, book a schedule service visit.

• Rectangular airbox with clips or screws
• Passenger-side engine bay placement on most trims
• Direct path to intake tract upstream of the MAF sensor

The 2017 Toyota 4Runner cabin air filter is located behind the glove box in the HVAC intake tray.

Lower the glove box and release the side stops to access the filter cover. A fresh cabin filter helps control dust and pollen common across the Salt Lake Valley’s changing seasons. If you’d like help, our technicians in Murray can replace it during the same visit as your engine filter—see current service specials.

• Behind-glove-box access panel
• Slides into a dedicated HVAC tray
• Arrows on filter indicate correct airflow direction

The engine air filter protects the 4.0L V6 intake from debris, while the cabin air filter cleans HVAC air for passengers.

The engine filter sits in the bay to safeguard combustion performance and fuel economy; the cabin filter sits behind the glove box to reduce dust and odors inside. Both contribute to comfort and reliability when driving through Murray, Sandy, and West Jordan. We install Toyota Genuine filters that fit and seal correctly.

• Engine filter = upstream of the MAF and throttle body
• Cabin filter = in-cabin HVAC airflow path
• Different media designs and sizes for distinct jobs

Common signs include reduced power, lower fuel economy, rough idle, weak HVAC airflow, and musty odors.

On the 2017 Toyota 4Runner, an engine filter that’s loaded with dust can make the V6 feel sluggish and increase fuel use, especially on dusty frontage roads. A spent cabin filter often shows up as diminished fan output or persistent cabin smells. If you notice these, schedule service in Murray.

• Engine: hesitation, louder intake noise, poor MPG
• Cabin: reduced airflow, foggy windows lingering longer
• Visible dirt or discoloration on filter media

The engine filter is typically a tool-free DIY swap, while the cabin filter requires glove-box removal and careful fitment.

Many 4Runner owners handle the engine filter at home; take care to seat the airbox evenly to avoid intake leaks. Our Murray team adds an intake housing check, a visual MAF inspection, and installs OEM-spec filters with proper airflow orientation. Prefer a quick visit? Use our schedule service link.

• DIY-friendly engine filter with latch clips
• Cabin filter access via glove-box stopper release
• Dealer service includes sealing, fit, and inspection steps

Yes — we install Toyota Genuine engine and cabin air filters that meet OEM specifications.

Factory-spec filters ensure correct fit, filtration efficiency, and sealing for the 2017 Toyota 4Runner’s intake and HVAC systems. As a Toyota dealership serving the Greater Salt Lake City metro, we follow Toyota repair procedures and use OEM parts whenever specified. Check our current service specials before booking.

• Toyota Genuine or OEM-equivalent spec
• Designed for the 4.0L V6 airflow and cabin HVAC tray
• Installed by OEM-certified technicians

Frequent dust, seasonal pollen, and mountain roads in the Salt Lake Valley can load filters faster than national averages.

Gravel shoulders, construction zones, and spring pollen around Murray, Holladay, and Taylorsville can accelerate both engine and cabin filter wear. If you drive unpaved routes or encounter winter road sand, inspect more often. Our team can check both filters during any visit—use schedule service.

• Dust and sand increase engine filter loading
• Pollen season affects cabin filter performance
• Elevation changes and trail use demand clean intake air

No ECU reset is required for air filter changes, but verifying MAF sensor readings and sealing the airbox properly is recommended.

After an engine filter swap, confirm the airbox latches are fully secured to avoid unmetered air. For the cabin filter, ensure the airflow arrow matches the HVAC direction behind the glove box. If a check engine light appears post-service, have the intake and MAF inspected at our Murray location.

• No software resets for engine or cabin filters
• Inspect MAF harness and gasket alignment
• Confirm glove-box reinstallation and stopper tabs

Our process for the 2017 Toyota 4Runner is straightforward and thorough. First, we inspect the engine air filter for contamination, then replace it if needed with a Toyota Genuine filter and confirm the airbox seals and clips are fully seated. Next, we access the cabin air filter behind the glove box, check debris load and odor, and install a correctly oriented OEM-spec element. We also perform a visual intake housing check and a basic MAF sensor condition check to help prevent unmetered air concerns. Disposal of used filters is handled responsibly. Want to bundle services or see current offers? Review our service specials, then schedule service for your preferred time in Murray.

The 2017 Toyota 4Runner’s 4.0L V6 benefits from a properly sealed engine air filter that protects combustion components and supports the rated 270 horsepower and 278 lb-ft of torque. The cabin air filter sits behind the glove box to trap dust and pollen before they reach occupants. Toyota recommends following the maintenance schedule in your owner’s manual to determine inspection and replacement intervals based on your driving conditions. We install Toyota Genuine or OEM-equivalent filters designed for the 4Runner’s intake and HVAC housings to ensure correct fit and filtration efficiency. Bring your 2017 Toyota 4Runner to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Larry H. Miller Toyota Murray serves the Salt Lake Valley and Greater Salt Lake City metro area—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local roads can kick up dust and seasonal pollen, and mountain adventures along the Wasatch Front can load both engine and cabin filters faster than typical highway use. Since 1979, our flagship dealership has provided factory-authorized care with OEM procedures tailored to Toyota SUVs like the 2017 Toyota 4Runner. Use our online portal to schedule service, and check service specials before you arrive. We’re conveniently located at 5650 South State Street, Murray, UT 84107—plan your visit and keep your 4Runner breathing clean air year-round.