2016 Toyota Tacoma Air Filter in Murray, UT

Contact Larry H. Miller Toyota Murray for a precise quote—pricing is provided up front for both the engine and cabin filters.

Costs vary by filter type (engine vs. cabin) and part selection (OEM vs. aftermarket). For your 2016 Toyota Tacoma with a 3.5L V6, we’ll confirm the exact parts and provide a written estimate before any work begins. Use our online form to request pricing, or stop by our Murray, UT location for a quick inspection.

• Separate quotes for engine and cabin filters
• OEM Toyota Genuine Parts available on request
• Up-front estimate before installation

The 2016 Toyota Tacoma’s engine air filter sits inside a rectangular airbox in the engine bay, typically on the driver’s side ahead of the intake tube.

Open the hood and look for the plastic airbox with metal or plastic clips; it houses the panel-style filter that feeds clean air to the 3.5L V6 intake. Always verify the airbox seal is seated correctly after service to prevent unfiltered air from entering the mass airflow (MAF) sensor and throttle body.

• Rectangular airbox with clips or screws
• Upstream of the MAF sensor and intake tube
• Easy visual access for quick checks

The 2016 Toyota Tacoma’s cabin air filter is located behind the glove box in the HVAC intake area.

Lower the glove box by releasing the side stops to access the rectangular filter tray. This filter screens dust, pollen, and debris before air reaches the vents, which is especially helpful during Utah’s spring pollen and summer dust periods around the Salt Lake Valley.

• Behind the glove box door for service access
• Slides out via a removable filter tray
• Protects HVAC evaporator from debris buildup

The engine filter protects the 3.5L V6’s intake air, while the cabin filter cleans the air you and your passengers breathe through the HVAC system.

Engine filters guard the MAF sensor and combustion chambers from dust and grit, helping maintain power and fuel economy. Cabin filters remove pollen, dust, and road debris from the ventilation stream, improving comfort and reducing odors inside your Tacoma.

• Engine filter = combustion protection and performance
• Cabin filter = HVAC air quality for occupants
• Different locations and service procedures

Common signs include reduced power, lower fuel economy, rough idle (engine filter), and weak airflow or musty odors (cabin filter).

On the 3.5L V6, a dirty engine filter can restrict intake flow, causing sluggish acceleration and inconsistent idle quality. Inside the truck, a dirty cabin filter may reduce blower volume and allow stale smells to linger, especially after dusty summer driving along the Wasatch Front.

• Engine: hesitation, poorer MPG, intake noise changes
• Cabin: diminished vent output, odors, increased fogging
• Visual: dark, debris-laden pleats on the removed filter

Yes—most owners can DIY the engine filter; the cabin filter is also accessible but may require glove box trim release.

DIY is feasible if you’re comfortable unclipping the engine airbox and lowering the Tacoma’s glove box to reach the cabin tray. Dealer service at Larry H. Miller Toyota Murray adds OEM-spec filter confirmation, an airbox seal check, and a quick visual look at the MAF sensor and intake ducts.

• DIY-friendly design for panel filters
• Dealer verifies fit, seal, and airflow direction
• Dispose of used filters responsibly

Yes—our service team installs Toyota Genuine engine and cabin air filters upon request.

OEM Toyota filters are designed to match the Tacoma’s 3.5L V6 airflow and the HVAC housing’s dimensions and seal. Ask our advisors to specify Toyota Genuine Parts on your work order for factory-spec fit and filtration performance.

• Toyota Genuine Parts fit and media specification
• Designed around Tacoma airbox and HVAC tray
• Available during any scheduled filter service

Follow the maintenance schedule in your Tacoma owner’s manual, and shorten intervals if you drive frequently on dusty Utah roads.

Salt Lake Valley conditions—spring pollen, summer construction dust, and canyon drives—can load filters faster than average. If you notice performance changes or weak HVAC airflow sooner, have us inspect both filters and advise on condition.

• Owner’s manual = primary interval reference
• Shorten interval for dirt roads and heavy dust
• Quick inspections available in Murray, UT

Service time varies based on shop workload and whether you’re replacing the engine filter, cabin filter, or both.

We prioritize same-visit completion and provide an accurate time estimate at check-in. Use our online tool to schedule service and see available time slots, or browse service specials before you arrive.

• Real-time timing estimate at write-up
• Engine and cabin filter services can be combined
• Convenient scheduling through our online portal

The 2016 Toyota Tacoma uses a panel-style engine air filter designed for the 3.5L V6 (278 hp, 265 lb-ft) and a rectangular cabin air filter positioned behind the glove box. Toyota Genuine engine and cabin filters are engineered to match OE airflow, sealing surfaces, and media density to protect the mass airflow sensor, throttle body, and HVAC evaporator. Replace filters per the maintenance schedule in your owner’s manual, and consider earlier inspections if you frequently drive in dusty or pollen-heavy conditions common across the Salt Lake Valley. A proper airbox seal and correct cabin filter airflow orientation are essential to prevent bypass leaks and noise. Bring your 2016 Toyota Tacoma to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Our air filter service is straightforward and thorough for the 2016 Toyota Tacoma. We start with an engine air filter inspection, remove debris from the airbox, and replace the filter if needed. Next, we inspect the cabin air filter behind the glove box, check airflow direction markings, and install a new filter when replacement is due. We also visually check the intake ducts and mass airflow (MAF) sensor area for loose fittings or debris that can affect drivability and fuel economy. You can schedule service online in minutes and review current service specials before your visit.

Larry H. Miller Toyota Murray serves drivers across the Salt Lake Valley and Greater Salt Lake City metro area—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions like spring pollen, summer dust from roadwork, and canyon drives along the Wasatch Front can load engine and cabin filters quickly on the 2016 Toyota Tacoma. Our factory-trained Toyota technicians perform efficient inspections and OEM-spec replacements, so you maintain performance, HVAC airflow, and comfort. Visit us at 5650 South State Street, Murray, UT 84107 for directions and fast check-in, or schedule service and check service specials online before you arrive.