2014 Toyota Sequoia Air Filter in Murray, UT

The 2014 Toyota Sequoia’s engine air filter sits inside a rectangular air box in the engine bay on the intake side.

Pop the hood and look for the plastic air box connected to the intake tube; releasing the clips exposes the filter element. The Sequoia’s 5.7L V8 needs clean intake air to maintain power and fuel economy, especially around Murray’s mixed city and highway driving. If you’re unsure, our team can show you the housing and inspect it during your visit.

• Access via spring clips or screws on the air box lid
• Positioned on the intake side feeding the 5.7L V8
• Quick visual check possible during routine service

The 2014 Toyota Sequoia’s cabin air filter is typically located behind the glove box within the HVAC intake.

Lower the glove box to access the cabin filter door; some trim pieces or stops may need to be released. Replacing this filter helps reduce dust, pollen, and odors for passengers in the three-row interior—useful for daily commuting in the Salt Lake Valley. Our technicians can swap it quickly during any scheduled visit.

• Behind the glove box inside the HVAC housing
• Usually requires releasing glove box stops to access
• Improves HVAC airflow and in-cabin air quality

The engine air filter cleans air for combustion, while the cabin air filter cleans air for the HVAC system and passengers.

On the Sequoia’s 5.7L V8, the engine filter protects the intake and helps maintain performance. The cabin filter sits in the HVAC path to reduce dust and allergens for people inside. Both are serviceable items and benefit from OEM-spec filtration to match Toyota’s airflow targets.

• Engine filter: protects engine and mass airflow (MAF) sensor
• Cabin filter: improves passenger comfort and odor control
• Different locations, materials, and service access

Common signs are reduced power, poorer fuel economy, or rough idle for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

On the Sequoia’s V8, restricted intake can dull throttle response and raise fuel use. Inside the cabin, a dirty filter strains the blower motor and can leave lingering smells. If you notice any of these symptoms while driving around Murray or up the Wasatch Front, it’s time for an inspection.

• Engine: sluggish acceleration, higher fuel consumption
• Cabin: low airflow, haze on glass, dustier vents
• Visible dirt or debris on the filter media

The engine filter is typically DIY-friendly, while the cabin filter can require glove box removal—dealers also inspect the intake and MAF.

Many owners can handle the Sequoia’s engine filter using basic tools. Dealer service adds OEM-spec parts verification, housing seal checks, and a visual MAF and intake inspection that protects performance. Choose the option that fits your comfort level; we’re happy to do either filter or both during one visit.

• DIY engine filter: quick if you’re comfortable under the hood
• Cabin filter: may involve trim/stops behind the glove box
• Dealer adds OEM-spec fitment and intake/MAF checks

Yes—our service department installs Toyota Genuine (OEM-spec) engine and cabin air filters for the 2014 Toyota Sequoia.

OEM-spec filtration helps maintain designed airflow and sealing for the Sequoia’s 5.7L V8 and HVAC system. It also supports proper MAF readings and HVAC performance in local driving conditions across the Salt Lake Valley. If you prefer, ask about available alternatives at write-up.

• Toyota Genuine or OEM-spec parts for fit and seal
• Protects MAF readings and engine performance
• Matches HVAC airflow targets for cabin comfort

Follow the Toyota Owner’s Manual maintenance schedule for the 2014 Toyota Sequoia for the official replacement interval.

Driving conditions around Murray—stop‑and‑go traffic, construction zones, or unpaved roads—can load the engine filter faster and justify earlier replacement after inspection. We can check restriction and condition during any visit and advise if service is due. Bring your manual or ask us to reference the factory schedule.

• Use the Toyota Owner’s Manual as the primary guide
• Shorten intervals if driving in dust, smoke, or heavy pollen
• We document findings and keep service records on file

Use the 2014 Toyota Sequoia Owner’s Manual cabin air filter schedule as the official reference.

Pollen seasons and urban dust in the Greater Salt Lake City area can shorten the useful life of the cabin filter. If airflow weakens or odors appear, replace sooner based on condition. We’ll examine the element during service and recommend timing that fits your driving.

• Manual-based interval; adjust for local air quality
• Replace sooner for odors, haze, or weak airflow
• Documented inspection during routine maintenance

The 2014 Toyota Sequoia uses two serviceable filters: an engine air filter for the 5.7L V8 intake and a cabin air filter for the HVAC system. Toyota Genuine (OEM-spec) filters are designed to match airflow, filtration efficiency, and sealing surfaces that protect the mass airflow sensor and blower motor. While exact replacement intervals depend on the factory maintenance schedule and driving conditions, regular inspections help prevent performance loss and in‑cabin discomfort. If you’ve noticed reduced power, rising fuel use, weak HVAC airflow, or musty odors, a filter check is warranted. Bring your 2014 Toyota Sequoia to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Larry H. Miller Toyota Murray is the flagship Toyota dealership serving the Salt Lake Valley and Greater Salt Lake City metro area, including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Our location at 5650 South State Street makes it easy to pair an air filter replacement with other routine maintenance during your day. Factory-trained technicians use OEM-spec filters and check the intake housing and MAF for contamination that can skew sensor readings. If you commute across I‑15 or head for weekend mountain drives, keeping both engine and cabin filters fresh helps your 2014 Toyota Sequoia breathe cleanly. For directions or to plan your visit, schedule your appointment or review service specials before you arrive.

Our air filter service is straightforward and thorough for your 2014 Toyota Sequoia. We start with an engine air filter inspection, confirming housing integrity and seal condition before replacing the element when needed. Next, we check the cabin air filter behind the glove box and replace it if restricted or odor‑laden. A visual inspection of the intake tract and mass airflow (MAF) sensor helps catch early contamination that can affect drivability. After reassembly, we verify proper fit, clips, and airflow. If you’re planning ahead, review current service specials and then schedule service online at your convenience.