2013 Toyota Fj-Cruiser Air Filter in Murray, UT

The 2013 Toyota FJ Cruiser’s engine air filter sits in a rectangular air box in the engine bay, typically on the passenger side.

This enclosure feeds the 4.0L V6 intake and can be opened by releasing a few clips. If you drive Utah’s dusty frontage roads or unpaved trails, this location sees increased dust loading. Stop by Larry H. Miller Toyota Murray for a quick visual check or schedule service online.

• Under-hood air box with clip-fastened cover
• Upstream of the mass airflow (MAF) sensor
• Address: 5650 South State Street, Murray, UT 84107

The 2013 Toyota FJ Cruiser’s cabin air filter is located behind the glove box within the HVAC intake housing.

Access typically involves lowering or removing the glove box to reveal the filter access door. Replacing this filter helps control dust, pollen, and wildfire smoke common along the Wasatch Front. If you prefer a technician to handle trim removal, book a visit at Larry H. Miller Toyota Murray or schedule an appointment.

• Behind glove box, inside HVAC plenum
• No tools or simple hand tools required
• Check service specials before you come in

The engine air filter protects the 4.0L V6’s intake from dirt, while the cabin air filter cleans the air entering the passenger compartment.

The engine element lives under the hood to safeguard combustion and sensors; the cabin filter sits behind the glove box to trap dust and allergens from Murray and Greater Salt Lake City air. Both are serviceable items and affect performance or comfort in different ways.

• Engine filter = intake protection and fuel economy
• Cabin filter = HVAC airflow and in-cabin air quality
• Different locations, materials, and service intervals

Common signs include reduced power or throttle response (engine filter) and weak HVAC airflow or musty odor (cabin filter).

On the 4.0L V6, a dirty engine filter can contribute to rough idle or lower fuel economy, especially after dusty trail days. Inside the cabin, a darkened element can make defrosting slower during Utah winters and increase fan noise. Our team can inspect both quickly.

• Engine: sluggish acceleration, poorer MPG
• Cabin: diminished airflow, fine dust on vents
• Visual darkening or debris on the filter media

Yes—the engine filter is usually DIY-friendly, while the cabin filter may require glove-box removal and careful re-seating of panels.

Many owners swap the under-hood filter at home; the cabin filter is also manageable with patience. Choosing our dealership adds an intake housing check, a visual MAF inspection, and installation of OEM-spec media. If you’d like help, schedule service online.

• DIY: follow under-hood air box markings
• Dealer: OEM-spec fit and sealing, proper airflow direction
• Quick visit from Murray, Sandy, or West Jordan

Yes—we install Toyota Genuine Parts filters that meet OEM specifications for fit, filtration efficiency, and airflow.

Using Toyota-engineered media helps protect the 4.0L V6 intake and maintain HVAC performance in Utah’s variable conditions. Genuine parts are designed to seal correctly in the factory air box and cabin housing, supporting consistent performance.

• Toyota Genuine engine and cabin filters
• Designed for the FJ Cruiser’s factory housings
• Available via schedule service today

Use our online schedule service portal at /service/appointment-form.htm to book your 2013 Toyota FJ Cruiser air filter appointment in Murray.

Choose a time that works, then check service specials for potential savings. Our location on South State Street is convenient to Millcreek, Holladay, and Taylorsville, and we handle both engine and cabin filters.

• Online scheduling: schedule service
• Review service specials before booking
• Address: 5650 South State Street, Murray, UT 84107

No—engine and cabin air filters serve different systems and typically require replacement on different schedules.

Service timing depends on driving conditions around the Salt Lake Valley. Dusty roads and spring pollen may load the cabin filter faster, while frequent off-road use can impact the engine filter. We’ll check both and replace only what’s needed.

• Separate inspections during each visit
• Replace based on condition, not a fixed pairing
• Book a check via schedule service

Larry H. Miller Toyota Murray services 2013 Toyota FJ Cruiser air filters at 5650 South State Street, Murray, UT 84107.

We’re the flagship Toyota dealership for the Salt Lake Valley, a short drive from Salt Lake City, Sandy, and South Jordan. Book online and our Toyota-trained team will handle engine and cabin filter checks and replacements.

• Central Murray location off State Street
• Easy access from I-15 and the Wasatch Front
• Schedule your appointment today

Your 2013 Toyota FJ Cruiser benefits from a thorough, methodical approach. Our technicians perform an engine air filter inspection, replace the element if restricted, and verify the air box seal. We then inspect the cabin air filter behind the glove box, replace it if loaded with dust or pollen, and ensure the airflow arrow is oriented correctly. An intake housing check helps confirm there are no cracked ducts or loose clamps, and we include a visual mass airflow (MAF) sensor inspection for contamination. We dispose of the used filters responsibly and road-test if needed to confirm normal response and HVAC airflow. Ready to book? Use our online portal to schedule service and review current service specials.

LHM Toyota Murray supports drivers across the Salt Lake Valley—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions such as dry summer dust, spring pollen, and winter road debris can shorten practical service life for both engine and cabin filters on the 2013 Toyota FJ Cruiser. Our Toyota-trained team inspects condition rather than relying solely on mileage, so you replace only what’s necessary. Visit us at 5650 South State Street, Murray, UT 84107 for prompt service, or schedule service online. If you have questions about timing or availability, send us a note through the scheduler and we’ll confirm your preferred slot. Check service specials before you arrive.

The 2013 Toyota FJ Cruiser uses two serviceable filters: an engine air filter for the 4.0L V6 (V-type, regular unleaded) and a cabin air filter for the HVAC system. Toyota Genuine Parts filters are engineered to meet OEM specifications for fit, filtration efficiency, and airflow. Typical locations are the under-hood air box for the engine filter and the HVAC housing behind the glove box for the cabin filter. If your driving includes unpaved roads or mountain trails, expect faster dust loading; urban pollen seasons can also impact the cabin element. Bring your 2013 Toyota FJ Cruiser to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.