2011 Toyota Venza Air Filter

The engine air filter typically costs {{vehicle.real_engine_filter_price_range_usd.min}}–{{vehicle.real_engine_filter_price_range_usd.max}} installed, and the cabin air filter costs {{vehicle.real_cabin_filter_price_range_usd.min}}–{{vehicle.real_cabin_filter_price_range_usd.max}} installed at Larry H. Miller Toyota Murray.

Pricing reflects Toyota OEM-spec filters, intake/MAF visual inspection, proper housing fitment, and environmentally responsible disposal. Our Murray location offers up-front, line-item estimates and honors current service specials. Exact totals vary by tax and whether both filters are serviced during the same visit.

• Includes OEM-spec filter media sized for the 3.5L V6 intake
• Cabin filter sized for the Venza HVAC box with correct airflow orientation
• Up-front pricing with inspection and disposal included

Toyota’s OEM guidance is {{vehicle.oem_engine_filter_interval_miles}} miles for the engine air filter under normal driving.

Along the Wasatch Front, dusty summers, winter road sand, and canyon travel can load the filter faster. If you frequently drive in construction zones, on unpaved roads, or during peak pollen, inspect earlier. We’ll check restriction and condition during routine visits and can swap the filter proactively.

• OEM interval: {{vehicle.oem_engine_filter_interval_miles}} miles (normal service)
• Inspect sooner with dust, smoke, or frequent mountain driving
• Quick checks available during oil service in Murray

The cabin air filter interval is {{vehicle.oem_cabin_filter_interval_miles}} miles under normal conditions.

In Greater Salt Lake City (Murray, Sandy, West Jordan, Millcreek), seasonal pollen and wildfire smoke can saturate the cabin filter early. If you notice weak airflow or a musty odor, replace sooner. We’ll show you the removed filter so you can see dust and debris loading before approving a new one.

• OEM interval: {{vehicle.oem_cabin_filter_interval_miles}} miles
• Replace earlier with heavy pollen or smoke exposure
• Quick inspection during any scheduled visit

The engine air filter sits inside the under‑hood airbox connected to the intake tube on the driver’s side of the V6 engine bay.

Access typically involves unclipping the airbox cover, lifting it slightly, and sliding out the rectangular filter. Always verify the airflow direction and ensure the perimeter seal is seated to prevent unmetered air around the 3.5L intake. If clips or the MAF sensor harness feel tight, our team can assist.

• Driver-side airbox with snap clips and intake duct
• Rectangular panel filter sized for 3.5L V6 intake
• Check MAF harness clearance before closing the lid

The engine air filter protects the V6’s combustion air intake, while the cabin air filter cleans air entering the HVAC system for passengers.

The under‑hood filter prevents dust from reaching the throttle body and MAF sensor, supporting power and fuel economy. The cabin filter, typically behind the glove box, traps pollen and fine particles to keep interior air fresher. Both are service items with distinct part numbers and materials.

• Engine filter = intake protection and MAF health
• Cabin filter = HVAC airflow and in-cabin air quality
• Separate locations, sizes, and change intervals

Common signs include reduced acceleration, lower fuel economy, rough idle (engine filter), weak HVAC airflow, and musty odors (cabin filter).

On the 3.5L V6, a heavily loaded engine filter can affect throttle response and cause the MAF to read inconsistently. Inside the Venza’s cabin, a saturated filter restricts blower output and can allow odors to linger. If you notice these symptoms in Murray traffic or on canyon climbs, schedule an inspection.

• Engine: sluggish power, uneven idle, poorer MPG
• Cabin: reduced airflow, haze on glass, odors
• Visual check: dark, debris-loaded pleats

The engine filter is generally DIY‑friendly, while the cabin filter may require glove box access; dealer service adds OEM parts and intake/MAF checks.

Many owners can unclip the airbox and swap the engine filter carefully. Cabin filter access typically involves removing the glove box damper and tray; forcing parts can break tabs. Our technicians install Toyota‑spec filters, verify airbox seals, and perform a visual MAF and duct inspection.

• DIY possible for engine filter with simple tools
• Cabin filter requires careful trim handling
• Dealer adds OEM-spec parts and inspections

Yes—our Toyota dealership installs Toyota Genuine Parts or OEM‑equivalent filters that meet the 2011 Toyota Venza specifications.

OEM-spec media, frame fitment, and sealing are critical for the 3.5L V6 intake and for proper HVAC airflow. Using the correct filter helps maintain performance and protects sensitive sensors. Ask to see your removed filters and the new parts before installation if you’d like to compare.

• Toyota Genuine or OEM‑equivalent fit and filtration
• Correct airflow orientation and perimeter seal
• Backed by our parts and labor warranty terms

Larry H. Miller Toyota Murray serves the Salt Lake Valley and Greater Salt Lake City metro area—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions such as windblown dust, winter sanding, and spring pollen can shorten filter life on a 2011 Toyota Venza. We inspect restriction and sealing on every visit and recommend replacement based on your driving mix. Our factory-trained team performs this service efficiently so you can get back on the road with clean intake and cabin airflow.

We’re conveniently located at 5650 South State Street, Murray, UT 84107. Use our online tool to schedule service, and check current service specials before you arrive. If you have questions about local driving conditions or seasonal timing, our advisors are happy to provide guidance tailored to your routes along the Wasatch Front.

Our air filter service for your 2011 Toyota Venza is designed to protect performance, HVAC airflow, and component longevity. We begin with an inspection of the engine air filter and housing, followed by replacement if restriction or damage is found. Next, we inspect and, if needed, replace the cabin microfilter, verifying airflow direction and ensuring the glove box and trim reassemble without squeaks or rattles. A visual check of the intake ducting and MAF sensor harness confirms proper routing and sealing.

Parts installed meet Toyota OEM specifications and are covered by our parts warranty per dealership terms. You can schedule an appointment online in minutes and review service specials for potential savings. We document findings on your repair order and can show you both removed filters upon request for transparency.

Your 2011 Toyota Venza uses an engine air filter sized for the 3.5L V6 (displacement 3456 cc, 268 hp/246 lb-ft) within a sealed under‑hood airbox, plus a passenger-compartment cabin microfilter in the HVAC case. Follow Toyota’s OEM-recommended intervals of {{vehicle.oem_engine_filter_interval_miles}} miles (engine) and {{vehicle.oem_cabin_filter_interval_miles}} miles (cabin) under normal service, inspecting sooner with dust, pollen, or road sand exposure. We install Toyota Genuine Parts or OEM‑equivalent filters matched to factory dimensions and filtration efficiency to protect the MAF, throttle body, blower motor, and evaporator core.

If you experience reduced power, rough idle, weak HVAC airflow, or interior odors, a clogged filter may be the cause. Bring your 2011 Toyota Venza to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.