2011 Toyota Land-Cruiser Air Filter in Murray, UT

The engine air filter typically costs {{vehicle.real_engine_filter_price_range_usd}}, and the cabin air filter costs {{vehicle.real_cabin_filter_price_range_usd}} at Larry H. Miller Toyota Murray.

Pricing reflects Toyota-spec filters for the 5.7L V8 and includes proper fitment for the Land Cruiser’s airbox and HVAC system. You’ll get up-front pricing with no surprises, and our technicians verify correct airflow direction and housing seals. Check our service specials for current offers before you schedule service.

• Includes OEM-spec filter media matched to Toyota requirements
• Intake/MAF visual inspection and housing reseal included
• Old filter recycling/disposal handled by our team

The OEM interval is {{vehicle.oem_engine_filter_interval_miles}} miles for a 2011 Toyota Land Cruiser.

Along the Wasatch Front, dust, winter road sand, and canyon driving can load the filter faster than average. If you frequently travel unpaved roads or drive through spring pollen events in Murray and Greater Salt Lake City, inspect sooner. Our advisors can check restriction during any visit and align with your driving habits.

• Follow owner’s manual and adjust for local dust and road treatments
• Shorter intervals for off-road and construction-zone driving
• Document service to support performance and longevity

The recommended cabin air filter interval is {{vehicle.oem_cabin_filter_interval_miles}} miles for a 2011 Toyota Land Cruiser.

Seasonal pollen in the Salt Lake Valley and winter debris can clog the cabin filter, reducing HVAC airflow and clarity on defrost. If you notice musty odors or weak ventilation, replace sooner. We install Toyota-spec filters that fit the Land Cruiser’s HVAC tray and maintain proper blower performance.

• Replace more often if driving in heavy pollen or smoke periods
• Inspect at each oil change for visible debris and odor
• Choose OEM-grade media for correct fit and seal

The engine air filter sits in the under‑hood airbox on the 5.7L V8 intake, while the cabin filter is typically behind the glove box.

On the 2011 Land Cruiser, the V8 intake housing is accessible in the engine bay for quick inspection and seal checks. The cabin filter tray is accessed by lowering the glove box door and removing the access cover. If clips are stiff or trim is tight, our team can service it safely.

• Engine filter: lift latches, open housing, verify gasket seating
• Cabin filter: remove tray, observe airflow arrow orientation
• Recheck for rattles and secure all fasteners before driving

The engine air filter protects the 5.7L V8’s intake from dust, while the cabin air filter cleans the air entering the passenger HVAC system.

Both use specific media and sizes for the Land Cruiser; the engine filter affects power and fuel economy, and the cabin filter affects airflow and interior air quality. Keeping both fresh supports drivability and comfort on Utah’s variable roads and seasons.

• Engine: impacts throttle response and MAF readings
• Cabin: improves defrost and reduces odors/allergens
• Different locations, different service intervals

Common signs include reduced power, lower fuel economy, rough idle (engine), and weak HVAC airflow or musty odors (cabin).

For the Land Cruiser’s 5.7L V8, a heavily loaded engine filter can skew MAF readings and restrict intake volume. Inside the cabin, a dirty filter strains the blower and limits defrost performance—especially important in Murray winters. A quick visual check can confirm contamination.

• Engine: sluggish acceleration, darker filter pleats
• Cabin: noisy fan at low airflow, dust on tray
• Illuminated warnings are rare but drivability changes matter

Yes, many owners DIY the engine filter, but dealer service ensures OEM-spec parts, correct fit, and intake/MAF checks.

The engine filter on the Land Cruiser is generally straightforward; the cabin filter may require careful trim movement and airflow orientation. At Larry H. Miller Toyota Murray, we verify seals, inspect the intake ducting, and confirm HVAC operation. If you prefer convenience and documentation, we can handle both.

• DIY engine filter is accessible in the airbox
• Cabin filter requires proper airflow arrow alignment
• Dealer visit adds MAF/intake visual and parts warranty

Yes—our technicians install Toyota Genuine Parts or OEM-spec filters that match 2011 Toyota Land Cruiser fit and filtration requirements.

Correct media density and gasket design protect the 5.7L V8 and ensure quiet, sealed HVAC operation. Using OEM-spec components helps maintain performance and supports warranty-friendly records. Ask our advisors to show the filter packaging during your visit for added confidence.

• OEM-spec fitment prevents intake leaks and whistling
• Filter media validated to Toyota engineering standards
• Documented service history for future maintenance planning

Air filter service is typically completed in about {{service.duration_minutes}} minutes at our Murray location.

Time includes engine and cabin filter inspection/replacement plus intake and MAF visual checks. To minimize your wait, book a confirmed slot with our online tool. If combining with other maintenance, total time may vary—your advisor will provide an accurate estimate when you schedule an appointment.

• Efficient workflow designed for Toyota SUVs
• Same-day service availability on most weekdays
• Combine with oil change to consolidate visits

Our air filter service for your 2011 Toyota Land Cruiser covers both engine and cabin systems with OEM-spec procedures. We begin with an engine air filter inspection, checking pleat loading, gasket condition, and the airbox seal. If replacement is due, we install a Toyota-spec filter and perform an intake duct and MAF sensor visual for debris or loose fittings. For the cabin, we access the filter tray behind the glove box, confirm airflow direction, and clean the housing before installing the new element. Parts installed carry our parts warranty terms: {{rooftop.warranty_terms.parts}}. If you prefer to budget maintenance, ask about available service payment options if {{rooftop.financing}} is offered. To plan your visit, schedule service online or call us at {{rooftop.phone}}.

Your 2011 Toyota Land Cruiser uses an engine air filter sized for the 5.7L V8 intake and a cabin filter designed to fit the HVAC cassette behind the glove box. Follow Toyotas OEM-recommended intervals of {{vehicle.oem_engine_filter_interval_miles}} miles (engine) and {{vehicle.oem_cabin_filter_interval_miles}} miles (cabin), adjusting sooner for dust, winter road sand, or frequent canyon driving. We install Toyota Genuine Parts or OEM-spec filters to maintain correct media density, seal integrity, and airflow. If your Land Cruiser shows reduced power, higher fuel use, or weak HVAC airflow, an inspection can confirm if restriction is the cause. Bring your 2011 Toyota Land Cruiser to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

We serve the Salt Lake Valley and Greater Salt Lake City metro area—including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville—with air filter care tailored to local conditions. {{rooftop.climate_context}} can load filters faster, so we pair OEM intervals with real-world inspections. With {{rooftop.years_in_operation}} years serving Northern Utah and {{rooftop.certified_tech_count}} certified technicians, our team keeps your 2011 Toyota Land Cruiser breathing clean air on- and off-road. Check current service specials, then use our online tool to schedule service. Find us at 5650 South State Street, Murray, UT 84107—minutes from I‑15 and convenient to the Wasatch Front.