2010 Toyota Venza Air Filter

The 2010 Toyota Venza’s engine air filter sits in a rectangular airbox inside the engine bay.

Lift the hood and look for the plastic airbox connected to the intake snorkel; on the 2.7L inline-4, it’s easily accessible for inspection and replacement. Keeping this filter clean helps your 182‑hp engine breathe properly for consistent power and fuel economy across Murray and Salt Lake City driving.

• Rectangular airbox with metal clips or screws
• Located along the intake ducting in the engine bay
• Quick tool-free or basic-tool access on most vehicles

The 2010 Toyota Venza’s cabin air filter is located behind the glove box in the HVAC intake.

Open the glove box, release the side stops, and lower it to access the cabin filter door. This filter screens dust, pollen, and road debris common around the Salt Lake Valley, improving interior air quality and HVAC performance.

• Behind the glove box, inside a slide-out filter tray
• Protects occupants and the HVAC evaporator core
• Typically a quick access once the glove box is lowered

The engine air filter protects the 2.7L intake for combustion, while the cabin air filter cleans air for passengers through the HVAC system.

Under-hood filtration supports engine power and efficiency; the cabin element improves breathing comfort and helps keep the heater/AC system clear. Replacing both at proper intervals maintains performance and a fresher interior during Murray’s varied seasons.

• Engine filter: under hood, feeds the intake tract
• Cabin filter: behind glove box, filters cabin air
• Different roles; both affect drivability and comfort

Common engine filter signs include reduced power and lower fuel economy; cabin filter signs include weak airflow and musty odors.

For the 2.7L inline‑4, a dirty engine filter can cause sluggish acceleration and rough idle. Inside the Venza, a clogged cabin filter restricts blower output and may create haze on the windshield. If you notice these in Murray traffic or mountain drives, it’s time to inspect.

• Engine: hesitation, poorer MPG, possible intake noise
• Cabin: diminished fan speed, dusty vents, odors
• Visual check: dark, debris-laden filter media

Yes—many owners DIY the engine filter; dealer service adds OEM-spec parts plus intake and MAF visual checks.

The engine filter is typically straightforward with basic tools. The cabin filter is accessible but may require removing glove box stops carefully. Choosing Larry H. Miller Toyota Murray ensures correct fitment and a quick inspection for debris, sealing, and sensor condition.

• DIY-friendly engine airbox clips/screws
• Cabin filter accessed by lowering glove box
• Dealer adds housing seal check and MAF visual

Toyota Genuine (OEM-spec) filters are available for the 2010 Toyota Venza at Larry H. Miller Toyota Murray.

OEM-spec elements match Toyota’s filtration efficiency and fit, supporting proper sealing in the Venza’s intake and HVAC housings. Ask our advisors to outfit your service with Toyota Genuine parts for consistent performance across Salt Lake Valley conditions.

• OEM-spec media and frame dimensions
• Designed for the 2.7L intake and HVAC tray
• Helps maintain factory performance targets

Visit Larry H. Miller Toyota Murray at 5650 South State Street, Murray, UT 84107 for 2010 Toyota Venza air filter service.

We serve Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville with factory-authorized care. Book online to align your visit with your schedule, and check current offers before you come in.

• Schedule online: schedule service
• See offers: service specials
• Convenient Salt Lake Valley access

Open the airbox, lift the filter, and inspect for light passing through—no light or heavy debris means it needs replacement.

Release the airbox clips or screws, remove the 2.7L’s panel filter, and hold it to a bright light. In Utah’s dusty, pollen-heavy seasons, filters load faster; replace if the media looks dark or the pleats are clogged.

• Check both sides of the pleats for debris
• Inspect the airbox seal and intake snorkel
• Reinstall with the arrow/orientation as marked

The 2010 Toyota Venza uses two serviceable filters: an engine air filter for the 2.7L inline‑4 intake and a cabin air filter for the HVAC system. The engine filter is a panel-style element inside the under-hood airbox; the cabin filter sits behind the glove box in a slide-out tray. Toyota Genuine (OEM-spec) filters are designed to match the Venza’s ducting, airbox seals, and HVAC housing to maintain proper flow and filtration. Driving across the Salt Lake Valley can expose filters to dust, pollen, and road grit, which accelerates loading. Regular inspections help sustain throttle response, fuel economy, and interior air quality. Bring your 2010 Toyota Venza to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service.

Our air filter service focuses on fit, sealing, and airflow performance for your 2010 Toyota Venza. A technician will remove the under-hood airbox cover, inspect the panel element, and replace it if contaminated. The intake housing and snorkel are checked for debris and proper sealing, and the MAF sensor area receives a visual inspection. Inside the cabin, the glove box is lowered to access the HVAC tray; the cabin filter is inspected and replaced if needed, ensuring correct airflow direction. We reinstall all panels, verify latches/stops, and confirm smooth HVAC operation. You can review service specials before booking and lock in a time online. To get started, schedule service or view our service specials.

Larry H. Miller Toyota Murray serves drivers across the Salt Lake Valley, including Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville. Local conditions—spring pollen bursts, summer construction dust, and winter road grit—can load both engine and cabin filters faster than in mild climates. Checking these filters during routine visits helps preserve your Venza’s performance and cabin comfort on I‑15 commutes and weekend canyon drives. Our factory-authorized team can confirm OEM-spec fitment and inspect surrounding components to protect airflow and sealing. Find a convenient time and head to our showroom at 5650 South State Street, Murray, UT 84107. For quick booking and current offers, schedule service and review service specials before you arrive.