2010 Toyota 4Runner Air Filter

The 2010 Toyota 4Runner’s engine air filter sits inside the air box in the engine bay, upstream of the intake tube.

This housing is designed for quick access so the filter can protect your 4.0L V6 intake from dust and debris common across the Wasatch Front. During service in Murray, our technicians open the air box, inspect the filter media, and reseal the lid to maintain correct MAF readings and airflow.

• Engine bay location: sealed air box ahead of the intake manifold
• Protects the 4.0L V6 (270 hp) from dirt and sand
• Quick visual check without removing additional trim

The 2010 Toyota 4Runner’s cabin air filter is housed in the HVAC case behind the glove box.

Access typically involves lowering the glove box to reach the filter tray, which captures dust and pollen before air enters the passenger vents. In Utah’s seasonal pollen and inversion periods, keeping this filter clean helps HVAC performance and in-cabin air quality as you commute through Murray and Greater Salt Lake City.

• Behind-glove-box access to the HVAC filter tray
• Improves airflow, reduces dust and odors in the cabin
• No tools or only basic hand motions on most vehicles

The engine air filter protects the 4.0L V6 intake, while the cabin air filter cleans air for passengers through the HVAC system.

Both are essential but serve different systems: the engine filter supports power and fuel economy; the cabin filter supports comfort and air quality. Our Murray service team checks each one separately so your SUV breathes clean air under the hood and in the cabin.

• Engine filter: engine bay air box for combustion air
• Cabin filter: HVAC housing behind the glove box
• Different media and service procedures for each

Typical signs include reduced power, lower fuel economy, rough idle (engine filter) and weak airflow or musty odors (cabin filter).

On Utah’s dusty and slushy roads, filters can load faster, affecting your 4.0L V6 performance and HVAC output. If you notice hesitation on climbs, louder intake noise, or stale cabin air, it’s time for an inspection in Murray.

• Engine: sluggish acceleration, higher fuel use, dirty media
• Cabin: blower works but airflow feels weak, odor when A/C starts
• Visual check often confirms dark, debris-filled pleats

The engine filter is typically DIY-friendly; the cabin filter is also accessible, but dealer service adds OEM-spec parts and intake/MAF checks.

If you prefer a quick, no-mess visit, our Toyota-trained team in Murray can replace both filters and verify sealing surfaces, clips, and sensor connections. DIY is feasible, but professional service helps avoid airbox leaks or mis-seated cabin filters that reduce HVAC performance.

• DIY possible with basic steps and clean workspace
• Dealer adds fitment verification and sealing inspection
• Intake and MAF visual checks included during service

Yes—our service department installs Toyota Genuine Parts filters that meet OEM specifications for the 2010 Toyota 4Runner.

Factory-spec media and fitment help maintain correct airflow readings and HVAC performance in Northern Utah’s varied climate. We also dispose of used filters responsibly and confirm the air box and cabin tray are properly secured after installation.

• OEM Toyota Genuine Parts for engine and cabin filters
• Designed to fit the 4.0L V6 intake housing precisely
• Supports performance, longevity, and warranty compliance

Follow the Toyota maintenance schedule in your 2010 Toyota 4Runner owner’s manual for the official engine air filter interval.

Driving in the Salt Lake Valley’s dust, road construction zones, and winter slush can increase filter loading, so inspections between scheduled services are wise. Our Murray team can check condition and replace only when needed.

• Use the owner’s manual for the OEM interval
• Inspect more often if driving unpaved or dusty roads
• Schedule a quick check during any oil change visit

Refer to the 2010 Toyota 4Runner owner’s manual for the recommended cabin air filter service interval.

Pollen spikes, wildfire smoke, and inversion periods along the Wasatch Front can shorten service life. If airflow weakens or odors develop, schedule a cabin filter inspection in Murray for a timely replacement.

• Owner’s manual lists the official Toyota interval
• Replace sooner if airflow drops or odors appear
• Quick access behind the glove box for inspection

LHM Toyota Murray serves Murray, Salt Lake City, Sandy, West Jordan, South Jordan, Millcreek, Holladay, and Taylorsville with Toyota-focused air filter care for your 2010 Toyota 4Runner. Local driving includes canyon dust, winter slush, and seasonal pollen that load filters faster than mild climates. Our factory-authorized team understands how these conditions affect the 4.0L V6 intake and your HVAC system, so we inspect and replace only when needed using Toyota-spec parts. With decades of continuous service to the Salt Lake Valley, we make it easy to keep your SUV breathing clean air. To plan your visit or request availability, schedule online or call our team for directions to 5650 South State Street, Murray, UT 84107.

Schedule service or check current service specials before you arrive.

Our air filter service for the 2010 Toyota 4Runner focuses on precise fitment and system checks. We begin with a visual inspection of the engine air filter in the air box, confirming seal condition and housing integrity. If replacement is needed, we install an OEM-spec Toyota engine filter and verify the intake tube clamps and mass airflow (MAF) sensor connections. For the cabin, we access the HVAC filter tray behind the glove box, inspect media condition, and install an OEM-spec cabin filter when required. We finish by reseating covers and confirming proper airflow direction and fit.

This visit includes responsible disposal of used filters and a quick post-install check. Ready to book? Schedule service or call us at (801) 563-4100. Don’t forget to review current service specials before your appointment.

The 2010 Toyota 4Runner’s 4.0L V6 relies on a panel-style engine air filter seated in a sealed air box to maintain stable airflow readings. The cabin air filter, positioned in the HVAC case behind the glove box, captures dust and pollen before air reaches the vents. Toyota Genuine Parts filters offer OEM-grade media and fitment to support performance, fuel economy, and in-cabin air quality. Follow the Toyota maintenance schedule in your owner’s manual for guidance on inspection and replacement, adjusting based on Utah’s dust, construction zones, and seasonal pollen.

Bring your 2010 Toyota 4Runner to Larry H. Miller Toyota Murray in Murray for OEM-spec filter service — schedule service. Use our online schedule service tool anytime.